• GLOBAL
     Syntax: /msg OperServ  GLOBAL message
     
     Allows Administrators to send messages to all users on the
     network. The message will be sent from the nick GeekShed-Announcer.
    
  • STATS
     Syntax: /msg OperServ  STATS [AKILL | ALL | RESET | MEMORY | UPLINK]
     
     Without any option, shows the current number of users and
     IRCops online (excluding Services), the highest number of
     users online since Services was started, and the length of
     time Services has been running.
     
     With the AKILL option, displays the current size of the
     AKILL list and the current default expiry time.
     
     The RESET option currently resets the maximum user count
     to the number of users currently present on the network.
     
     The MEMORY option displays information on the memory
     usage of Services. Using this option can freeze Services for
     a short period of time on large networks; don't overuse it!
     
     The UPLINK option displays information about the current
     server Anope uses as an uplink to the network.
     
     The ALL displays the user and uptime statistics, and
     everything you'd see with MEMORY and UPLINK options.
     
     UPTIME may be used as a synonym for STATS.
    
  • OPER
     Syntax: /msg OperServ  OPER ADD nick
             OPER DEL {nick | entry-num | list}
             OPER LIST [mask | list]
             OPER CLEAR
     
     Allows the Services Root Admins to add or remove nicknames
     to or from the Services operator list.  A user whose nickname
     is on the Services operator list and who has identified to
     OperServ will be able to access Services operator commands.
     
     The OPER ADD command adds the given nickname to the
     Services operator list.
     
     The OPER DEL command removes the given nick from the
     Services operator list.  If a list of entry numbers is given,
     those entries are deleted.  (See the example for LIST below.)
     
     The OPER LIST command displays the Services operator list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        OPER LIST 2-5,7-9
           Lists Services operator entries numbered 2 through
           5 and 7 through 9.
     
     The OPER CLEAR command clears all entries of the
     Services operator list.
     
     Any IRC operator may use the OPER LIST form of the command.
    
  • ADMIN
     Syntax: /msg OperServ  ADMIN ADD nick
             ADMIN DEL {nick | entry-num | list}
             ADMIN LIST [mask | list]
             ADMIN CLEAR
     
     Allows the Services root to add or remove nicknames
     to or from the Services admin list.  A user whose nickname
     is on the Services admin list and who has identified to
     OperServ will be able to access Services admin commands.
     
     The ADMIN ADD command adds the given nickname to the
     Services admin list.
     
     The ADMIN DEL command removes the given nick from the
     Services admin list.  If a list of entry numbers is given,
     those entries are deleted.  (See the example for LIST below.)
     
     The ADMIN LIST command displays the Services admin list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        ADMIN LIST 2-5,7-9
           Lists Services admin entries numbered 2 through
           5 and 7 through 9.
     
     The ADMIN CLEAR command clears all entries of the
     Services admin list.
     
     Any IRC operator may use the ADMIN LIST form of the command.
     All other use limited to Services root.
    
  • IGNORE
     Syntax: /msg OperServ  IGNORE {ADD|DEL|LIST|CLEAR} [time] [nick | mask]
     
     Allows Services Admins to make Services ignore a nick or mask
     for a certain time or until the next restart. The default
     time format is seconds. You can specify it by using units.
     Valid units are: s for seconds, m for minutes,
     h for hours and d for days.
     Combinations of these units are not permitted.
     To make Services permanently ignore the	user, type 0 as time.
     When adding a mask, it should be in the format user@host
     or nick!user@host, everything else will be considered a nick.
     Wildcards are permitted.
     
     Ignores will not be enforced on IRC Operators.
    
  • MODE
     Syntax: /msg OperServ  MODE channel modes
     
     Allows Services operators to set channel modes for any
     channel.  Parameters are the same as for the standard /MODE
     command.
    
  • UMODE
     Syntax: /msg OperServ  UMODE user modes
     
     Allows Super Admins to set user modes for any user.
     Parameters are the same as for the standard /MODE
     command.
    
  • OLINE
     Syntax: /msg OperServ  OLINE user flags
     
     Allows Super Admins to give Operflags to any user.
     Flags have to be prefixed with a "+" or a "-". To
     remove all flags simply type a "-" instead of any flags.
    
  • CLEARMODES
     Syntax: /msg OperServ  CLEARMODES channel [ALL]
     
     Clears all binary modes (i,k,l,m,n,p,s,t) and bans from a
     channel.  If ALL is given, also clears all ops and
     voices (+o and +v modes) from the channel.
    
  • KICK
     Syntax: /msg OperServ  KICK channel user reason
     
     Allows staff to kick a user from any channel.
     Parameters are the same as for the standard /KICK
     command.  The kick message will have the nickname of the
     IRCop sending the KICK command prepended; for example:
     
     *** SpamMan has been kicked off channel #my_channel by OperServ (Alcan (Flood))
    
  • AKILL
     Syntax: /msg OperServ  AKILL ADD [+expiry] mask reason
             AKILL DEL {mask | entry-num | list}
             AKILL LIST [mask | list]
             AKILL VIEW [mask | list]
             AKILL CLEAR
     
     Allows Services operators to manipulate the AKILL list.  If
     a user matching an AKILL mask attempts to connect, Services
     will issue a KILL for that user and, on supported server
     types, will instruct all servers to add a ban (K-line) for
     the mask which the user matched.
     
     AKILL ADD adds the given user@host/ip mask to the AKILL
     list for the given reason (which must be given).
     expiry is specified as an integer followed by one of d
     (days), h (hours), or m (minutes).  Combinations (such as
     1h30m) are not permitted.  If a unit specifier is not
     included, the default is days (so +30 by itself means 30
     days).  To add an AKILL which does not expire, use +0.  If the
     usermask to be added starts with a +, an expiry time must
     be given, even if it is the same as the default.  The
     current AKILL default expiry time can be found with the
     STATS AKILL command.
     
     The AKILL DEL command removes the given mask from the
     AKILL list if it is present.  If a list of entry numbers is
     given, those entries are deleted.  (See the example for LIST
     below.)
     
     The AKILL LIST command displays the AKILL list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        AKILL LIST 2-5,7-9
           Lists AKILL entries numbered 2 through 5 and 7
           through 9.
     
     AKILL VIEW is a more verbose version of AKILL LIST, and
     will show who added an AKILL, the date it was added, and when
     it expires, as well as the user@host/ip mask and reason.
     
     AKILL CLEAR clears all entries of the AKILL list.
     
    
  • SGLINE
     Syntax: /msg OperServ  SGLINE ADD [+expiry] mask:reason
         SGLINE DEL {mask | entry-num | list}
             SGLINE LIST [mask | list]
             SGLINE VIEW [mask | list]
             SGLINE CLEAR
     
     Allows Services operators to manipulate the SGLINE list.  If
     a user with a realname matching an SGLINE mask attempts to
     connect, Services will not allow it to pursue his IRC
     session.
     
     SGLINE ADD adds the given realname mask to the SGLINE
     list for the given reason (which must be given).
     expiry is specified as an integer followed by one of d
     (days), h (hours), or m (minutes).  Combinations (such as
     1h30m) are not permitted.  If a unit specifier is not
     included, the default is days (so +30 by itself means 30
     days).  To add an SGLINE which does not expire, use +0.  If the
     realname mask to be added starts with a +, an expiry time must
     be given, even if it is the same as the default.  The
     current SGLINE default expiry time can be found with the
     STATS AKILL command.
     Note: because the realname mask may contain spaces, the
     separator between it and the reason is a colon.
     
     The SGLINE DEL command removes the given mask from the
     SGLINE list if it is present.  If a list of entry numbers is
     given, those entries are deleted.  (See the example for LIST
     below.)
     
     The SGLINE LIST command displays the SGLINE list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        SGLINE LIST 2-5,7-9
           Lists SGLINE entries numbered 2 through 5 and 7
           through 9.
     
     SGLINE VIEW is a more verbose version of SGLINE LIST, and
     will show who added an SGLINE, the date it was added, and when
     it expires, as well as the realname mask and reason.
     
     SGLINE CLEAR clears all entries of the SGLINE list.
    
  • SQLINE
     Syntax: /msg OperServ  SQLINE ADD [+expiry] mask reason
             SQLINE DEL {mask | entry-num | list}
             SQLINE LIST [mask | list]
             SQLINE VIEW [mask | list]
             SQLINE CLEAR
     
     Allows Services operators to manipulate the SQLINE list.  If
     a user with a nick matching an SQLINE mask attempts to
     connect, Services will not allow it to pursue his IRC
     session.
    
     If the first character of the mask is #, services will
     prevent the use of matching channels (on IRCds that
     support it).
     
     SQLINE ADD adds the given mask to the SQLINE
     list for the given reason (which must be given).
     expiry is specified as an integer followed by one of d
     (days), h (hours), or m (minutes).  Combinations (such as
     1h30m) are not permitted.  If a unit specifier is not
     included, the default is days (so +30 by itself means 30
     days).  To add an SQLINE which does not expire, use +0.
     If the mask to be added starts with a +, an expiry time
     must be given, even if it is the same as the default. The
     current SQLINE default expiry time can be found with the
     STATS AKILL command.
     
     The SQLINE DEL command removes the given mask from the
     SQLINE list if it is present.  If a list of entry numbers is
     given, those entries are deleted.  (See the example for LIST
     below.)
     
     The SQLINE LIST command displays the SQLINE list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        SQLINE LIST 2-5,7-9
           Lists SQLINE entries numbered 2 through 5 and 7
           through 9.
     
     SQLINE VIEW is a more verbose version of SQLINE LIST, and
     will show who added an SQLINE, the date it was added, and when
     it expires, as well as the mask and reason.
     
     SQLINE CLEAR clears all entries of the SQLINE list.
    
  • SZLINE
     Syntax: /msg OperServ  SZLINE ADD [+expiry] mask reason
             SZLINE DEL {mask | entry-num | list}
             SZLINE LIST [mask | list]
             SZLINE VIEW [mask | list]
             SZLINE CLEAR
     
     Allows Services operators to manipulate the SZLINE list.  If
     a user with an IP matching an SZLINE mask attempts to
     connect, Services will not allow it to pursue his IRC
     session (and this, whether the IP has a PTR RR or not).
     
     SZLINE ADD adds the given IP mask to the SZLINE
     list for the given reason (which must be given).
     expiry is specified as an integer followed by one of d
     (days), h (hours), or m (minutes).  Combinations (such as
     1h30m) are not permitted.  If a unit specifier is not
     included, the default is days (so +30 by itself means 30
     days).  To add an SZLINE which does not expire, use +0.  If the
     realname mask to be added starts with a +, an expiry time must
     be given, even if it is the same as the default.  The
     current SZLINE default expiry time can be found with the
     STATS AKILL command.
     
     The SZLINE DEL command removes the given mask from the
     SZLINE list if it is present.  If a list of entry numbers is
     given, those entries are deleted.  (See the example for LIST
     below.)
     
     The SZLINE LIST command displays the SZLINE list.
     If a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        SZLINE LIST 2-5,7-9
           Lists SZLINE entries numbered 2 through 5 and 7
           through 9.
     
     SZLINE VIEW is a more verbose version of SZLINE LIST, and
     will show who added an SZLINE, the date it was added, and when
     it expires, as well as the IP mask and reason.
     
     SZLINE CLEAR clears all entries of the SZLINE list.
    
  • SET
     Syntax: /msg OperServ  SET option setting
    
     Sets various global Services options.  Option names
     currently defined are:
         READONLY   Set read-only or read-write mode
         LOGCHAN    Report log messages to a channel
         DEBUG      Activate or deactivate debug mode
         NOEXPIRE   Activate or deactivate no expire mode
         SUPERADMIN Activate or deactivate super-admin mode
         SQL        Activate or deactivate sql mode
         IGNORE     Activate or deactivate ignore mode
         LIST       List the options
    
    • SET READONLY
       Syntax: /msg OperServ  SET READONLY {ON | OFF}
       
       Sets read-only mode on or off.  In read-only mode, normal
       users will not be allowed to modify any Services data,
       including channel and nickname access lists, etc.  IRCops
       with sufficient Services privileges will be able to modify
       Services' AKILL list and drop or forbid nicknames and
       channels, but any such changes will not be saved unless
       read-only mode is deactivated before Services is terminated
       or restarted.
       
       This option is equivalent to the command-line option
       -readonly.
      
    • SET LOGCHAN
       Syntax: /msg OperServ  SET LOGCHAN {ON | OFF}
      
       With this setting on, Services will send its logs to a specified
       channel as well as the log file. LogChannel must also be defined
       in the Services configuration file for this setting to be of any
       use.
       
       This option is equivalent to the command-line option -logchan.
       
       Note: This can have strong security implications if your log
       channel is not properly secured.
      
    • SET DEBUG
       Syntax: /msg OperServ  SET DEBUG {ON | OFF | num}
       
       Sets debug mode on or off.  In debug mode, all data sent to
       and from Services as well as a number of other debugging
       messages are written to the log file.  If num is
       given, debug mode is activated, with the debugging level set
       to num.
      
       This option is equivalent to the command-line option
       -debug.
      
    • SET LIST
       Syntax: /msg OperServ  SET LIST
      
       Display the various OperServ settings
      
    • SET NOEXPIRE
       Syntax: /msg OperServ  SET NOEXPIRE {ON | OFF}
      
       Sets no expire mode on or off.  In no expire mode, nicks,
       channels, akills and exceptions won't expire until the
       option is unset.
      
       This option is equivalent to the command-line option
       -noexpire.
      
    • SET SQL
       Syntax: /msg OperServ  SET SQL {ON | OFF}
      
       Setting this will toggle Anope's usage of SQL, this should
       be used to disable and enable SQL should your SQL server go down
       while services are running.
      
    • SET SUPERADMIN
       Syntax: /msg OperServ  SET SUPERADMIN {ON | OFF}
      
       Setting this will grant you extra privileges such as the
       ability to be "founder" on all channel's etc...
      
       This option is not persistent, and should only be used when
       needed, and set back to OFF when no longer needed.
      
  • NOOP
     Syntax: /msg OperServ  NOOP SET server
             NOOP REVOKE server
    
     NOOP SET remove all O:lines of the given
     server and kill all IRCops currently on it to
     prevent them from rehashing the server (because this
     would just cancel the effect).
    
     NOOP REVOKE makes all removed O:lines available again
     on the given server.
    
     Note: The server is not checked at all by the
     Services.
    
  • JUPE
     Syntax: /msg OperServ  JUPE server [reason]
     
     Tells Services to jupiter a server -- that is, to create
     a fake "server" connected to Services which prevents
     the real server of that name from connecting.  The jupe
     may be removed using a standard SQUIT.  If a reason is
     given, it is placed in the server information field;
     otherwise, the server information field will contain the
     text "Juped by <nick>", showing the nickname of the
     person who jupitered the server.
    
  • RAW
     Syntax: /msg OperServ  RAW text
     
     Sends a string of text directly to the server to which
     Services is connected.  This command has a very limited
     range of uses, and can wreak havoc on a network if used
     improperly.  DO NOT USE THIS COMMAND unless you are
     absolutely certain you know what you are doing!
     
     This command is disabled on GeekShed
    
  • UPDATE
     Syntax: /msg OperServ  UPDATE
     
     Causes Services to update all database files as soon as you
     send the command.
     
    
  • RELOAD
     Syntax: /msg OperServ  RELOAD
    
     Causes Services to reload the configuration file. Note that
     some directives still need the restart of the Services to
     take effect (such as Services' nicknames, activation of the
     session limitation, etc.)
    
  • QUIT
     Syntax: /msg OperServ  QUIT
     
     Causes Services to do an immediate shutdown; databases are
     not saved.  This command should not be used unless
     damage to the in-memory copies of the databases is feared
     and they should not be saved.  For normal shutdowns, use the
     SHUTDOWN command.
    
  • SHUTDOWN
     Syntax: /msg OperServ  SHUTDOWN
     
     Causes Services to save all databases and then shut down.
    
  • RESTART
     Syntax: /msg OperServ  RESTART
     
     Causes Services to save all databases and then restart
     (i.e. exit and immediately re-run the executable).
    
  • CHANLIST
     Syntax: /msg OperServ  CHANLIST [{pattern | nick} [SECRET]]
     
     Lists all channels currently in use on the IRC network, whether they
     are registered or not.
    
     If pattern is given, lists only channels that match it. If a nickname
     is given, lists only the channels the user using it is on. If SECRET is
     specified, lists only channels matching pattern that have the +s or
     +p mode.
    
  • USERLIST
     Syntax: /msg OperServ  USERLIST [{pattern | channel} [INVISIBLE]]
     
     Lists all users currently online on the IRC network, whether their
     nick is registered or not.
     
     If pattern is given, lists only users that match it (it must be in
     the format nick!user@host). If channel is given, lists only users
     that are on the given channel. If INVISIBLE is specified, only users
     with the +i flag will be listed.
    
  • EXCEPTION
     Syntax: /msg OperServ  EXCEPTION ADD [+expiry] mask limit reason
             EXCEPTION DEL {mask | list}
             EXCEPTION MOVE num position
             EXCEPTION LIST [mask | list]
             EXCEPTION VIEW [mask | list]
     
     Allows Services admins to manipulate the list of hosts that
     have specific session limits - allowing certain machines,
     such as shell servers, to carry more than the default number
     of clients at a time. Once a host reaches it's session limit,
     all clients attempting to connect from that host will be
     killed. Before the user is killed, they are notified, via a
     /NOTICE from OperServ, of a source of help regarding session
     limiting. The content of this notice is a config setting.
     
     EXCEPTION ADD adds the given host mask to the exception list.
     Note that nick!user@host and user@host masks are invalid!
     Only real host masks, such as box.host.dom and *.host.dom,
     are allowed because sessions limiting does not take nick or
     user names into account. limit must be a number greater than
     or equal to zero. This determines how many sessions this host
     may carry at a time. A value of zero means the host has an
     unlimited session limit. See the AKILL help for details about
     the format of the optional expiry parameter.
     EXCEPTION DEL removes the given mask from the exception list.
     EXCEPTION MOVE moves exception num to position. The
     exceptions inbetween will be shifted up or down to fill the gap.
     EXCEPTION LIST and EXCEPTION VIEW show all current
     exceptions; if the optional mask is given, the list is limited
     to those exceptions matching the mask. The difference is that
     EXCEPTION VIEW is more verbose, displaying the name of the
     person who added the exception, it's session limit, reason,
     host mask and the expiry date and time.
     
     Note that a connecting client will "use" the first exception
     their host matches. Large exception lists and widely matching
     exception masks are likely to degrade services' performance.
    
  • SESSION
     Syntax: /msg OperServ  SESSION LIST threshold
             SESSION VIEW host
     
     Allows Services admins to view the session list.
    
     SESSION LIST lists hosts with at least threshold sessions.
     The threshold must be a number greater than 1. This is to
     prevent accidental listing of the large number of single
     session hosts.
     SESSION VIEW displays detailed information about a specific
     host - including the current session count and session limit.
     The host value may not include wildcards.
    
     See the EXCEPTION help for more information about session
     limiting and how to set session limits specific to certain
     hosts and groups thereof.
    
  • CHANKILL
     Syntax: /msg OperServ  CHANKILL [+expiry] channel reason
    
     Puts an AKILL for every nick on the specified channel. It
     uses the entire and complete real ident@host for every nick,
     then enforces the AKILL. 
    
  • DEFCON
     Syntax: /msg OperServ  DEFCON [1|2|3|4|5]
    
     The defcon system can be used to implement a pre-defined
     set of restrictions to services useful during an attempted
     attack on the network.
    
  • MODINFO
     Syntax: /msg OperServ  MODINFO FileName
     
     This command lists information about the specified loaded module
    
  • MODLIST
     Syntax: /msg OperServ  MODLIST [Core|3rd|protocol|encryption|supported|qatested]
     
     Lists all currently loaded modules.
    
  • MODLOAD
     Syntax: /msg OperServ  MODLOAD FileName
     
     This command loads the module named FileName from the modules
     directory.
    
  • MODUNLOAD
     Syntax: /msg OperServ  MODUNLOAD FileName
     
     This command unloads the module named FileName from the modules
     directory.
    
  • SVSNICK
     Syntax: /msg OperServ  SVSNICK nick newnick
     
     Forcefully changes a user's nickname from nick to newnick.
     Limited to Super Admins.